Re: [PATCH] arm/arm64: dts: Drop "arm,armv8-pmuv3" compatible usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/12/24 17:28, Rob Herring wrote:
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.

There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
SoC Maintainers, Can you please apply this directly.
---
  arch/arm/boot/dts/broadcom/bcm2711.dtsi              | 4 ++--
  arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi    | 2 +-
  arch/arm64/boot/dts/amazon/alpine-v2.dtsi            | 2 +-
  arch/arm64/boot/dts/apm/apm-storm.dtsi               | 2 +-
  arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +-
  arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi     | 2 +-
  arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi  | 2 +-
  arch/arm64/boot/dts/cavium/thunder-88xx.dtsi         | 2 +-
  arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi        | 2 +-
  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi       | 2 +-
  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi       | 2 +-
  arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi       | 7 +++++++
  arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi       | 7 +++++++
  arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi       | 5 -----
  arch/arm64/boot/dts/freescale/imx8dxl.dtsi           | 2 +-
  arch/arm64/boot/dts/intel/keembay-soc.dtsi           | 2 +-
  arch/arm64/boot/dts/intel/socfpga_agilex.dtsi        | 2 +-

For SoCFPGA,

Acked-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux