On Mon, Apr 01, 2024 at 07:21:51PM +0200, Adam Skladowski wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
[..]
> + mdss: display-subsystem@1a00000 {
[..]
> + mdss_dsi0: dsi@1a94000 {
> + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
> + reg = <0x01a94000 0x25c>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + clock-names = "mdp_core",
> + "iface",
> + "bus",
> + "byte",
> + "pixel",
> + "core";
> +
> + assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
> + <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi0_phy 0>,
> + <&mdss_dsi0_phy 1>;
> +
> + phys = <&mdss_dsi0_phy>;
> +
> + operating-points-v2 = <&dsi0_opp_table>;
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
Seems reasonable to keep this disabled as well. Further more &mdss_dsi0
depends on &mdss_dsi0_phy which is disabled.
> + ports {
[..]
> + mdss_dsi0_phy: phy@1a94a00 {
> + compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
> + reg = <0x01a94a00 0xd4>,
> + <0x01a94400 0x280>,
> + <0x01a94b80 0x30>;
> + reg-names = "dsi_pll",
> + "dsi_phy",
> + "dsi_phy_regulator";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
PS. Leave &mdss_mdp enabled...
Regards,
Bjorn
