Re: [PATCH v20 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 08, 2024, Krishna Kurapati wrote:
> DWC3 Qcom wrapper currently supports only wakeup configuration
> for single port controllers. Read speed of each port connected
> to the controller and enable wakeup for each of them accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++---------------
>  1 file changed, 41 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 35eb338514bc..12182e0f8f45 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -57,6 +57,7 @@ struct dwc3_qcom_port {
>  	int			dp_hs_phy_irq;
>  	int			dm_hs_phy_irq;
>  	int			ss_phy_irq;
> +	enum usb_device_speed	usb2_speed;
>  };
>  
>  struct dwc3_qcom {
> @@ -68,7 +69,6 @@ struct dwc3_qcom {
>  	struct reset_control	*resets;
>  	struct dwc3_qcom_port	ports[DWC3_MAX_PORTS];
>  	u8			num_ports;
> -	enum usb_device_speed	usb2_speed;
>  
>  	struct extcon_dev	*edev;
>  	struct extcon_dev	*host_edev;
> @@ -307,7 +307,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
>  	return dwc->xhci;
>  }
>  
> -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
>  {
>  	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  	struct usb_device *udev;
> @@ -318,14 +318,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
>  	 */
>  	hcd = platform_get_drvdata(dwc->xhci);
>  
> -	/*
> -	 * It is possible to query the speed of all children of
> -	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> -	 * currently supports only 1 port per controller. So
> -	 * this is sufficient.
> -	 */
>  #ifdef CONFIG_USB
> -	udev = usb_hub_find_child(hcd->self.root_hub, 1);
> +	udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
>  #else
>  	udev = NULL;
>  #endif
> @@ -356,26 +350,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>  	disable_irq_nosync(irq);
>  }
>  
> -static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> +static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
>  {
> -	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
> +	dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
>  
> -	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> -	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> -			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> +	if (port->usb2_speed == USB_SPEED_LOW) {
> +		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
> +	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
> +			(port->usb2_speed == USB_SPEED_FULL)) {
> +		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
>  	} else {
> -		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> -		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
> +		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
>  	}
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
> +	dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
>  }
>  
> -static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> +static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
>  {
> -	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
> +	dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
>  
>  	/*
>  	 * Configure DP/DM line interrupts based on the USB2 device attached to
> @@ -386,21 +380,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
>  	 * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
>  	 */
>  
> -	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> +	if (port->usb2_speed == USB_SPEED_LOW) {
> +		dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
>  					    IRQ_TYPE_EDGE_FALLING);
> -	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> -			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> +	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
> +			(port->usb2_speed == USB_SPEED_FULL)) {
> +		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
>  					    IRQ_TYPE_EDGE_FALLING);
>  	} else {
> -		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> +		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
>  					    IRQ_TYPE_EDGE_RISING);
> -		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> +		dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
>  					    IRQ_TYPE_EDGE_RISING);
>  	}
>  
> -	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
> +	dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0);
> +}
> +
> +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> +{
> +	int i;
> +
> +	for (i = 0; i < qcom->num_ports; i++)
> +		dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
> +}
> +
> +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> +{
> +	int i;
> +
> +	for (i = 0; i < qcom->num_ports; i++)
> +		dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
>  }
>  
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -427,7 +437,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	 * freezable workqueue.
>  	 */
>  	if (dwc3_qcom_is_host(qcom) && wakeup) {
> -		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
> +		for (i = 0; i < qcom->num_ports; i++)
> +			qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
>  		dwc3_qcom_enable_interrupts(qcom);
>  	}
>  
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux