Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 02, 2024 at 02:33:49PM +0530, Komal Bajaj wrote:
> Enable the ADSP, CDSP and WPSS that are found on qcs6490-rb3gen2.
> 
> Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 97824c769ba3..a25431ddf922 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -434,6 +434,21 @@ &qupv3_id_0 {
>  	status = "okay";
>  };
> 
> +&remoteproc_adsp {
> +	firmware-name = "qcom/qcm6490/adsp.mbn";

Should this be qcm6490?


I already proposed a patch to add adsp and cdsp, using qcs6490, and this
was merged earlier this week. Please pay attention and review patches
posted on the public list.

Either way, this will now have to be rebased on linux-next.

Thanks,
Bjorn

> +	status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +	firmware-name = "qcom/qcm6490/cdsp.mbn";
> +	status = "okay";
> +};
> +
> +&remoteproc_wpss {
> +	firmware-name = "qcom/qcm6490/wpss.mbn";
> +	status = "okay";
> +};
> +
>  &tlmm {
>  	gpio-reserved-ranges = <32 2>, /* ADSP */
>  			       <48 4>; /* NFC */
> --
> 2.42.0
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux