Dmitry,
Any more comments?
On 3/29/2024 12:50 PM, Kuogee Hsieh wrote:
Currently qmp_combo_dp_power_on() always return 0 in regardless of
return value of cfg->configure_dp_phy(). This patch propagate
return value of cfg->configure_dp_phy() all the way back to caller.
Changes in V3:
-- add v2 changes log
Changes in V2:
-- add Fixes tag
-- add dev_err() to qmp_v3_configure_dp_phy()
-- add dev_err() to qmp_v4_configure_dp_phy()
Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 36632fa..513d99d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2343,8 +2343,10 @@ static int qmp_v3_configure_dp_phy(struct qmp_combo *qmp)
writel(0x05, qmp->dp_dp_phy + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
ret = qmp_combo_configure_dp_clocks(qmp);
- if (ret)
+ if (ret) {
+ dev_err(qmp->dev, "dp phy configure failed, err=%d\n", ret);
return ret;
+ }
writel(0x04, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG2);
writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
@@ -2519,8 +2521,10 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
int ret;
ret = qmp_v456_configure_dp_phy(qmp);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(qmp->dev, "dp phy configure failed, err=%d\n", ret);
return ret;
+ }
/*
* At least for 7nm DP PHY this has to be done after enabling link
@@ -2754,6 +2758,7 @@ static int qmp_combo_dp_power_on(struct phy *phy)
const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *tx = qmp->dp_tx;
void __iomem *tx2 = qmp->dp_tx2;
+ int ret;
mutex_lock(&qmp->phy_mutex);
@@ -2766,11 +2771,11 @@ static int qmp_combo_dp_power_on(struct phy *phy)
cfg->configure_dp_tx(qmp);
/* Configure link rate, swing, etc. */
- cfg->configure_dp_phy(qmp);
+ ret = cfg->configure_dp_phy(qmp);
mutex_unlock(&qmp->phy_mutex);
- return 0;
+ return ret;
}
static int qmp_combo_dp_power_off(struct phy *phy)
