On 3/31/2024 7:09 AM, Dmitry Baryshkov wrote:
On Sat, 30 Mar 2024 at 20:30, Ajit Pandey <quic_ajipan@xxxxxxxxxxx> wrote:
Add Graphics Clock Controller (GPUCC) support for SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gpucc-sm4450.c | 806 ++++++++++++++++++++++++++++++++
3 files changed, 816 insertions(+)
create mode 100644 drivers/clk/qcom/gpucc-sm4450.c
[skipped]
+static int gpu_cc_sm4450_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &gpu_cc_sm4450_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_lucid_evo_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+ clk_lucid_evo_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
+
+ /* Keep some clocks always enabled */
+ qcom_branch_set_clk_en(regmap, 0x93a4); /* GPU_CC_CB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x9004); /* GPU_CC_CXO_AON_CLK */
+ qcom_branch_set_clk_en(regmap, 0x900c); /* GPU_CC_DEMET_CLK */
Why? At least other drivers model these three clocks properly.
These clocks are POR on in SM4450 and required to be kept always enabled
for GPU functionality hence keep them enabled from probe only.
+
+ return qcom_cc_really_probe(pdev, &gpu_cc_sm4450_desc, regmap);
+}
+
+static struct platform_driver gpu_cc_sm4450_driver = {
+ .probe = gpu_cc_sm4450_probe,
+ .driver = {
+ .name = "gpucc-sm4450",
+ .of_match_table = gpu_cc_sm4450_match_table,
+ },
+};
+
+module_platform_driver(gpu_cc_sm4450_driver);
+
+MODULE_DESCRIPTION("QTI GPUCC SM4450 Driver");
+MODULE_LICENSE("GPL");
--
2.25.1
--
Thanks, and Regards
Ajit
