Fix the following compile warnings:
warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
drivers/spmi/spmi-pmic-arb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 9ed1180fe31f..704fd4506971 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -132,6 +132,8 @@ struct apid_data {
* @wr_base: on v1 "core", on v2 "chnls" register base off DT.
* @intr: address of the SPMI interrupt control registers.
* @cnfg: address of the PMIC Arbiter configuration registers.
+ * @core: core register base for v2 and above only (see above)
+ * @core_size: core register base size
* @lock: lock to synchronize accesses.
* @channel: execution environment channel to use for accesses.
* @irq: PMIC ARB interrupt.
@@ -144,6 +146,7 @@ struct apid_data {
* @apid_count: on v5 and v7: number of APIDs associated with the
* particular SPMI bus instance
* @mapping_table: in-memory copy of PPID -> APID mapping table.
+ * @mapping_table_valid:bitmap containing valid-only periphs
* @domain: irq domain object for PMIC IRQ domain
* @spmic: SPMI controller object
* @ver_ops: version dependent operations.
@@ -232,6 +235,7 @@ static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb *pmic_arb,
/**
* pmic_arb_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
+ * @pmic_arb: the SPMI PMIC arbiter
* @bc: byte count -1. range: 0..3
* @reg: register's address
* @buf: output parameter, length must be bc + 1
@@ -246,6 +250,7 @@ pmic_arb_read_data(struct spmi_pmic_arb *pmic_arb, u8 *buf, u32 reg, u8 bc)
/**
* pmic_arb_write_data: write 1..4 bytes from buf to pmic-arb's register
+ * @pmic_arb: the SPMI PMIC arbiter
* @bc: byte-count -1. range: 0..3.
* @reg: register's address.
* @buf: buffer to write. length must be bc + 1.
--
2.34.1
