QMP PHY used in SC7180 requires 3 clocks:
* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from GCC
While at it, let's move 'clocks' property before 'clock-names' to match
the style used commonly.
Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 2b481e20ae38..5c9ec8047f00 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1585,9 +1585,12 @@ ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sc7180-qmp-ufs-phy",
"qcom,sm7150-qmp-ufs-phy";
reg = <0 0x01d87000 0 0x1000>;
- clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
- clock-names = "ref", "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
power-domains = <&gcc UFS_PHY_GDSC>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
--
2.44.0
