On Wed, 27 Mar 2024 23:51:33 +0100, André Apitzsch wrote: > Document Silergy SY7802 flash LED driver devicetree bindings. > > Signed-off-by: André Apitzsch <git@xxxxxxxxxxx> > --- > .../devicetree/bindings/leds/silergy,sy7802.yaml | 96 ++++++++++++++++++++++ > 1 file changed, 96 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/leds/silergy,sy7802.example.dts:23.13-26: Warning (reg_format): /example-0/flash-led-controller@53:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240327-sy7802-v1-1-db74ab32faaf@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
