Add feature to share an I2C serial engine from two subsystem(SS) so that
individual client from different subsystem can work on the same bus.
This is possible in GSI mode where driver queues the TRE with required
descriptors and ensures it executes them in a mutual exclusive way.
Add Lock TRE at the start of the transfer and Unlock TRE at the end of
the transfer protecting the DMA channel. This way not allowing other SS
to queue anything in between and disturb the data path.
Since the GPIOs are also shared for the i2c bus, do not touch GPIO
configuration while going to runtime suspend and only turn off the
clocks. This will allow other SS to continue to transfer the data.
To realize this, add below change:
1) Check if the Particular I2C requires to be shared during probe() time.
2) If shared SE add LOCK TRE inside gpi_create_i2c_tre() before first
message.
3) If shared SE add UNLOCK TRE inside gpi_create_i2c_tre() before
last transfer message.
4) Export function geni_se_clks_off() to call explicitly instead of
geni_se_resources_off().
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
---
drivers/dma/qcom/gpi.c | 33 +++++++++++++++++++++++++++++-
drivers/i2c/busses/i2c-qcom-geni.c | 24 ++++++++++++++++------
drivers/soc/qcom/qcom-geni-se.c | 4 +++-
include/linux/dma/qcom-gpi-dma.h | 6 ++++++
include/linux/soc/qcom/geni-se.h | 3 +++
5 files changed, 62 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 1c93864e0e4d..df276ccf9cbb 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -2,6 +2,7 @@
/*
* Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
* Copyright (c) 2020, Linaro Limited
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/dma/qcom-gpi.h>
@@ -65,6 +66,12 @@
/* DMA TRE */
#define TRE_DMA_LEN GENMASK(23, 0)
+/* Lock TRE */
+#define TRE_I2C_LOCK_WORD_3 (3 << 20 | 0 << 16 | BIT(0))
+
+/* Unlock TRE */
+#define TRE_I2C_UNLOCK_WORD_3 (3 << 20 | 1 << 16 | BIT(8))
+
/* Register offsets from gpi-top */
#define GPII_n_CH_k_CNTXT_0_OFFS(n, k) (0x20000 + (0x4000 * (n)) + (0x80 * (k)))
#define GPII_n_CH_k_CNTXT_0_EL_SIZE GENMASK(31, 24)
@@ -522,7 +529,7 @@ struct gpii {
bool ieob_set;
};
-#define MAX_TRE 3
+#define MAX_TRE 5
struct gpi_desc {
struct virt_dma_desc vd;
@@ -1644,6 +1651,18 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
struct gpi_tre *tre;
unsigned int i;
+ /* create lock tre for first tranfser */
+ if (i2c->shared_se && i2c->first_msg) {
+ tre = &desc->tre[tre_idx];
+ tre_idx++;
+
+ /* lock: chain bit set */
+ tre->dword[0] = 0;
+ tre->dword[1] = 0;
+ tre->dword[2] = 0;
+ tre->dword[3] = TRE_I2C_LOCK_WORD_3;
+ }
+
/* first create config tre if applicable */
if (i2c->set_config) {
tre = &desc->tre[tre_idx];
@@ -1702,6 +1721,18 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT);
}
+ /* Unlock tre for last transfer */
+ if (i2c->shared_se && i2c->last_msg && i2c->op != I2C_READ) {
+ tre = &desc->tre[tre_idx];
+ tre_idx++;
+
+ /* unlock tre: ieob set */
+ tre->dword[0] = 0;
+ tre->dword[1] = 0;
+ tre->dword[2] = 0;
+ tre->dword[3] = TRE_I2C_UNLOCK_WORD_3;
+ }
+
for (i = 0; i < tre_idx; i++)
dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0],
desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]);
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index da94df466e83..c5935c5f46e8 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
#include <linux/acpi.h>
#include <linux/clk.h>
@@ -99,6 +100,7 @@ struct geni_i2c_dev {
struct dma_chan *rx_c;
bool gpi_mode;
bool abort_done;
+ bool is_shared;
};
struct geni_i2c_desc {
@@ -601,6 +603,7 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
peripheral.clk_div = itr->clk_div;
peripheral.set_config = 1;
peripheral.multi_msg = false;
+ peripheral.shared_se = gi2c->is_shared;
for (i = 0; i < num; i++) {
gi2c->cur = &msgs[i];
@@ -611,6 +614,8 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
if (i < num - 1)
peripheral.stretch = 1;
+ peripheral.first_msg = (i == 0) ? true : false;
+ peripheral.last_msg = (i == num - 1) ? true : false;
peripheral.addr = msgs[i].addr;
ret = geni_i2c_gpi(gi2c, &msgs[i], &config,
@@ -802,6 +807,11 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->clk_freq_out = KHZ(100);
}
+ if (of_property_read_bool(pdev->dev.of_node, "qcom,shared-se")) {
+ gi2c->is_shared = true;
+ dev_info(&pdev->dev, "Multi-EE usecase with shared SE\n");
+ }
+
if (has_acpi_companion(dev))
ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
@@ -964,14 +974,16 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
disable_irq(gi2c->irq);
- ret = geni_se_resources_off(&gi2c->se);
- if (ret) {
- enable_irq(gi2c->irq);
- return ret;
-
+ if (gi2c->is_shared) {
+ geni_se_clks_off(&gi2c->se);
} else {
- gi2c->suspended = 1;
+ ret = geni_se_resources_off(&gi2c->se);
+ if (ret) {
+ enable_irq(gi2c->irq);
+ return ret;
+ }
}
+ gi2c->suspended = 1;
clk_disable_unprepare(gi2c->core_clk);
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 2e8f24d5da80..20166c8fc919 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
/* Disable MMIO tracing to prevent excessive logging of unwanted MMIO traces */
#define __DISABLE_TRACE_MMIO__
@@ -482,13 +483,14 @@ void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words,
}
EXPORT_SYMBOL_GPL(geni_se_config_packing);
-static void geni_se_clks_off(struct geni_se *se)
+void geni_se_clks_off(struct geni_se *se)
{
struct geni_wrapper *wrapper = se->wrapper;
clk_disable_unprepare(se->clk);
clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
}
+EXPORT_SYMBOL_GPL(geni_se_clks_off);
/**
* geni_se_resources_off() - Turn off resources associated with the serial
diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
index 6680dd1a43c6..8589c711afae 100644
--- a/include/linux/dma/qcom-gpi-dma.h
+++ b/include/linux/dma/qcom-gpi-dma.h
@@ -65,6 +65,9 @@ enum i2c_op {
* @rx_len: receive length for buffer
* @op: i2c cmd
* @muli-msg: is part of multi i2c r-w msgs
+ * @shared_se: bus is shared between subsystems
+ * @bool first_msg: use it for tracking multimessage xfer
+ * @bool last_msg: use it for tracking multimessage xfer
*/
struct gpi_i2c_config {
u8 set_config;
@@ -78,6 +81,9 @@ struct gpi_i2c_config {
u32 rx_len;
enum i2c_op op;
bool multi_msg;
+ bool shared_se;
+ bool first_msg;
+ bool last_msg;
};
#endif /* QCOM_GPI_DMA_H */
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index 0f038a1a0330..caf2c0c4505b 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _LINUX_QCOM_GENI_SE
@@ -494,6 +495,8 @@ int geni_se_resources_off(struct geni_se *se);
int geni_se_resources_on(struct geni_se *se);
+void geni_se_clks_off(struct geni_se *se);
+
int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl);
int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
--
2.25.1
