[PATCH v2 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add DP output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The RB3Gen2 board comes with a mini DP connector, describe this, enable
MDSS, DP controller and the PHY that drives this.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 63ebe0774f1d..f90bf3518e98 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -39,6 +39,20 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	dp-connector {
+		compatible = "dp-connector";
+		label = "DP";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&mdss_edp_out>;
+			};
+		};
+	};
+
 	reserved-memory {
 		xbl_mem: xbl@80700000 {
 			reg = <0x0 0x80700000 0x0 0x100000>;
@@ -471,6 +485,25 @@ &gcc {
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&dp_connector_in>;
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -511,3 +544,10 @@ &usb_1_qmpphy {
 &wifi {
 	memory-region = <&wlan_fw_mem>;
 };
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&edp_hot_plug_det {
+	function = "gpio";
+	bias-disable;
+};

-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux