Add a device tree for the Motorola Moto G (2013) smartphone based on the Qualcomm MSM8226 SoC. Initially supported features: - Buttons (Volume Down/Up, Power) - eMMC - Hall Effect Sensor - SimpleFB display - TMP108 temperature sensor - Vibrator Note: the dhob and shob reserved-memory regions are seemingly a part of some Motorola specific (firmware?) mechanism, see [1]. [1] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/Documentation/devicetree/bindings/misc/hob_ram.txt Signed-off-by: Stanislav Jakubek <stano.jakubek@xxxxxxxxx> --- Changes in V2: - split hob-ram reserved-memory region into dhob and shob - add a note and a link to downstream documentation with more information about these regions arch/arm/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8226-motorola-falcon.dts | 359 ++++++++++++++++++ 2 files changed, 360 insertions(+) create mode 100644 arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 6478a39b3be5..3eacbf5c0785 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += \ + msm8226-motorola-falcon.dtb \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-huawei-sturgeon.dtb \ diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts new file mode 100644 index 000000000000..029e1b1659c9 --- /dev/null +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G (2013)"; + compatible = "motorola,falcon", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vddio-supply = <&vddio_disp_vreg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + vin-supply = <&pm8226_l8>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + dhob@f500000 { + reg = <0x0f500000 0x40000>; + no-map; + }; + + shob@f540000 { + reg = <0x0f540000 0x2000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + /* Actually <0x0fa00000 0x500000>, but first 100000 is smem */ + reserved@fb00000 { + reg = <0x0fb00000 0x400000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + + temperature-sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; + }; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&tlmm { + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_vddio_disp_default: reg-vddio-disp-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; -- 2.34.1
