Re: [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 26, 2024 at 03:58:07PM +0530, Krishna Kurapati wrote:
> On multiport supported controllers, each port has its own DP/DM
> and SS (if super speed capable) interrupts. As per the bindings,
> their interrupt names differ from standard ones having "_x" added
> as suffix (x indicates port number). Identify from the interrupt
> names whether the controller is a multiport controller or not.
> Refactor dwc3_qcom_setup_irq() call to parse multiport interrupts
> along with non-multiport ones accordingly..
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 137 ++++++++++++++++++++++++++---------
>  1 file changed, 103 insertions(+), 34 deletions(-) 

> -static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> +static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_num, bool is_multiport)

Here you use "port_num", when it's really a (zero-based) port index.

Please change to "port_index".

>  {
>  	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> +	const char *irq_name;
>  	int irq;
>  	int ret;
>  
> -	irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
> +	if (is_multiport)
> +		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_num + 1);
> +	else
> +		irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
> +	if (!irq_name)
> +		return -ENOMEM;

> +static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
> +{
> +	char irq_name[14];
> +	int port_index;
> +	int irq;
> +
> +	irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
> +	if (irq <= 0)
> +		return 1;
> +
> +	for (port_index = 2; port_index <= DWC3_MAX_PORTS; port_index++) {

And here you use port_index, when it's really a one-based port number.

I explicitly used "port" when we discussed the update here for this
reason ("port_num" works too).

Please fix this last thing in a v18 and we're good to go.

> +		sprintf(irq_name, "dp_hs_phy_%d", port_index);
> +
> +		irq = platform_get_irq_byname_optional(pdev, irq_name);
> +		if (irq <= 0)
> +			return port_index - 1;
> +	}
> +
> +	return DWC3_MAX_PORTS;
> +}

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux