This series adds QoS support for QNOC type device which can be found on SC7280 platform. It adds support for programming priority, priority forward disable and urgency forwarding. This helps in priortizing the traffic originating from different interconnect masters at NOC(Network On Chip). Changes in v4: - Addressed comments related to spacing and line wrapping. - Changed the print level from warn to info for regmap related errors. - Use of GENMASK instead of BIT_MASK for bit mask creation. Odelu Kukatla (4): interconnect: qcom: icc-rpmh: Add QoS configuration support interconnect: qcom: sc7280: enable QoS programming dt-bindings: interconnect: add clock property to enable QOS on SC7280 arm64: dts: qcom: sc7280: Add clocks for QOS configuration .../interconnect/qcom,sc7280-rpmh.yaml | 14 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 + drivers/interconnect/qcom/icc-rpmh.c | 99 ++++++ drivers/interconnect/qcom/icc-rpmh.h | 34 ++ drivers/interconnect/qcom/sc7280.c | 332 ++++++++++++++++++ 5 files changed, 482 insertions(+) -- 2.17.1
