Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/21/2024 6:43 PM, Dmitry Baryshkov wrote:
On Thu, 21 Mar 2024 at 11:27, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> wrote:

Add device nodes for video and camera clock controllers on Qualcomm
SM8650 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8650.dtsi | 28 ++++++++++++++++++++++++++++
  1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 32c0a7b9aded..d862aa6be824 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4,6 +4,8 @@
   */

  #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8650-camcc.h>
  #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
  #include <dt-bindings/clock/qcom,sm8650-gcc.h>
  #include <dt-bindings/clock/qcom,sm8650-gpucc.h>
@@ -3110,6 +3112,32 @@ opp-202000000 {
                         };
                 };

+               videocc: clock-controller@aaf0000 {
+                       compatible = "qcom,sm8650-videocc";
+                       reg = <0 0x0aaf0000 0 0x10000>;
+                       clocks = <&bi_tcxo_div2>,
+                                <&gcc GCC_VIDEO_AHB_CLK>;
+                       power-domains = <&rpmhpd RPMHPD_MMCX>;
+                       required-opps = <&rpmhpd_opp_low_svs>;

The required-opps should no longer be necessary.


Sure, will check and remove this if not required.

Thanks,
Jagadeesh

+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+               };
+
+               camcc: clock-controller@ade0000 {
+                       compatible = "qcom,sm8650-camcc";
+                       reg = <0 0x0ade0000 0 0x20000>;
+                       clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                                <&bi_tcxo_div2>,
+                                <&bi_tcxo_ao_div2>,
+                                <&sleep_clk>;
+                       power-domains = <&rpmhpd RPMHPD_MMCX>;
+                       required-opps = <&rpmhpd_opp_low_svs>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+               };
+
                 mdss: display-subsystem@ae00000 {
                         compatible = "qcom,sm8650-mdss";
                         reg = <0 0x0ae00000 0 0x1000>;
--
2.43.0








[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux