Each pair of WSA8845 speakers share the powerdown SD_N GPIO, thus this
GPIO is specified twice in each WSA8845 device node. Such DTS was added
hoping non-exclusive GPIO usage would be accepted, but it turned out
otherwise: it is not supported by the Linux kernel.
Linux kernel however supports sharing reset GPIOs, when used via the
reset controller framework as implemented in commit 26c8a435fce6 ("ASoC:
dt-bindings: qcom,wsa8840: Add reset-gpios for shared line") and
commit c721f189e89c ("reset: Instantiate reset GPIO controller for
shared reset-gpios").
Convert the property with shutdown GPIO to "reset-gpios" to use
mentioned Linux kernel feature. This allows to bring all four speakers
out of reset.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes in v2:
1. Rb tag.
2. Fix typo in commit msg (bia->via)
Patch #3 in the series was already applied.
v1: https://lore.kernel.org/all/20240227142725.625561-1-krzysztof.kozlowski@xxxxxxxxxx/
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index d7ba45953277..266a461f4882 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -802,13 +802,14 @@ &smb2360_2_eusb2_repeater {
&swr0 {
status = "okay";
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
/* WSA8845, Left Woofer */
left_woofer: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
- pinctrl-0 = <&spkr_01_sd_n_active>;
- pinctrl-names = "default";
- powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -819,8 +820,7 @@ left_woofer: speaker@0,0 {
left_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
- /* pinctrl in left_woofer node because of sharing the GPIO*/
- powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -853,13 +853,14 @@ wcd_tx: codec@0,3 {
&swr3 {
status = "okay";
+ pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+ pinctrl-names = "default";
+
/* WSA8845, Right Woofer */
right_woofer: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
- pinctrl-0 = <&spkr_23_sd_n_active>;
- pinctrl-names = "default";
- powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
@@ -870,8 +871,7 @@ right_woofer: speaker@0,0 {
right_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
- /* pinctrl in right_woofer node because of sharing the GPIO*/
- powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TwitterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
--
2.34.1
