On Thu, Mar 14, 2024 at 08:53:46PM +0530, Manivannan Sadhasivam wrote: > As per the PCIe base spec r5.0, section 5.2, Link Down event can happen > under any of the following circumstances: > > 1. Fundamental/Hot reset > 2. Link disable transmission by upstream component > 3. Moving from L2/L3 to L0 > > In those cases, Link Down causes some non-sticky DWC registers to loose the > state (like REBAR, etc...). So the drivers need to reinitialize them to > function properly once the link comes back again. > > This is not a problem for drivers supporting PERST# IRQ, since they can > reinitialize the registers in the PERST# IRQ callback. But for the drivers > not supporting PERST#, there is no way they can reinitialize the registers > other than relying on Link Down IRQ received when the link goes down. So > let's add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the > non-sticky registers and also notifies the EPF drivers about link going > down. > > This API can also be used by the drivers supporting PERST# to handle the > scenario (2) mentioned above. > > NOTE: For the sake of code organization, move the dw_pcie_ep_linkup() > definition just above dw_pcie_ep_linkdown(). > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>
