Re: [PATCH 1/2] dt-bindings: usb: qcom,pmic-typec: drop port description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/03/2024 13:28, Dmitry Baryshkov wrote:
Then the actual usage doesn't match the schema. usb-c-connector
clearly defines HS, SS and SBU ports

Its a bit restrictive IMO, data-role and power-role switching is not limited to HS and in fact can be done with a GPIO for example.

/Looks in Documentation/devicetree/bindings/connector/usb-connector.yaml

Yeah I mean this just doesn't cover all use-cases ..

ports:
    $ref: /schemas/graph.yaml#/properties/ports
    description: OF graph bindings modeling any data bus to the connector
unless the bus is between parent node and the connector. Since a single connector can have multiple data buses every bus has an assigned OF graph
      port number as described below.

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: High Speed (HS), present in all connectors.

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: Super Speed (SS), present in SS capable connectors.

      port@2:
        $ref: /schemas/graph.yaml#/properties/port
description: Sideband Use (SBU), present in USB-C. This describes the
          alternate mode connection of which SBU is a part.

TBH I think we should drop this HS, SS stuff from the connector definition - there's nothing to say in a h/w definition anywhere HS must be a port or indeed SS - not all hardware knows or cares about different HS/SS signalling.

Documentation bit-rot

---
bod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux