[PATCH 0/3] Add devicetree support of USB for QDU/QRU1000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds devicetree nodes to support interconnects and usb for qdu/qru1000.
This is based on previously sent driver series[1].
[1]
https://lore.kernel.org/linux-arm-msm/20240319090729.14674-1-quic_kbajaj@xxxxxxxxxxx/

------
Changes in v2:
* Changes qmpphy node name
* Changes dr_mode to otg and added USB-B port USB role switch
* Dropped maximum-speed property from usb dwc3 node
* Link to v1: https://lore.kernel.org/linux-arm-msm/20240311120859.18489-1-quic_kbajaj@xxxxxxxxxxx/

Komal Bajaj (3):
  arm64: dts: qcom: qdu1000: Add USB3 and PHY support
  arm64: dts: qcom: qdu1000-idp: enable USB nodes
  arm64: dts: qcom: qru1000-idp: enable USB nodes

 arch/arm64/boot/dts/qcom/qdu1000-idp.dts |  65 +++++++++++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi    | 133 +++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000-idp.dts |  65 +++++++++++
 3 files changed, 263 insertions(+)

--
2.42.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux