[PATCH 3/5] clk: qcom: apss-ipq-pll: remove 'pll_type' field from struct 'apss_pll_data'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The value of the 'pll_type' field of 'struct apps_pll_data'
is used only by the probe function to decide which config
function should be called for the actual PLL. However this
can be derived also from the 'pll' field  which makes the
'pll_type' field redundant.

Additionally, the CLK_ALPHA_PLL_TYPE_* enumeration values
are meant to be used as indices to the 'clk_alpha_pll_regs'
array so using those to define the pll type in this driver
is misleading anyway.

Change the probe function to use the 'pll' field to determine
the configuration function to be used, and remove the
'pll_type' field to simplify the code.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
---
 drivers/clk/qcom/apss-ipq-pll.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index f5c7eaf8db374..fb015385dae4b 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -147,37 +147,31 @@ static const struct alpha_pll_config ipq9574_pll_config = {
 };
 
 struct apss_pll_data {
-	int pll_type;
 	struct clk_alpha_pll *pll;
 	const struct alpha_pll_config *pll_config;
 };
 
 static const struct apss_pll_data ipq5018_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER,
 	.pll = &ipq_pll_stromer,
 	.pll_config = &ipq5018_pll_config,
 };
 
 static struct apss_pll_data ipq5332_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
 	.pll = &ipq_pll_stromer_plus,
 	.pll_config = &ipq5332_pll_config,
 };
 
 static struct apss_pll_data ipq8074_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq8074_pll_config,
 };
 
 static struct apss_pll_data ipq6018_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq6018_pll_config,
 };
 
 static struct apss_pll_data ipq9574_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq9574_pll_config,
 };
@@ -210,10 +204,10 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENODEV;
 
-	if (data->pll_type == CLK_ALPHA_PLL_TYPE_HUAYRA)
+	if (data->pll == &ipq_pll_huayra)
 		clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
-	else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER ||
-		 data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
+	else if (data->pll == &ipq_pll_stromer ||
+		 data->pll == &ipq_pll_stromer_plus)
 		clk_stromer_pll_configure(data->pll, regmap, data->pll_config);
 
 	ret = devm_clk_register_regmap(dev, &data->pll->clkr);

-- 
2.44.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux