The register offset array defined locally for the CLK_ALPHA_PLL_TYPE_STROMER_PLUS is the same as the entry defined for CLK_ALPHA_PLL_TYPE_STROMER in the 'clk_alpha_pll_regs' array. To avoid code duplication, remove the local definition and use the global one instead. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx> --- Depends on the following patches: - "clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure" Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@xxxxxxxxx - "clk: qcom: clk-alpha-pll: Stromer register cleanup" Link: https://lore.kernel.org/r/20240311-alpha-pll-stromer-cleanup-v1-0-f7c0c5607cca@xxxxxxxxx --- drivers/clk/qcom/apss-ipq-pll.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c index dfffec2f06ae7..ed3e6405f99cb 100644 --- a/drivers/clk/qcom/apss-ipq-pll.c +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -24,17 +24,6 @@ static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = { [PLL_OFF_TEST_CTL] = 0x30, [PLL_OFF_TEST_CTL_U] = 0x34, }, - [CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = { - [PLL_OFF_L_VAL] = 0x08, - [PLL_OFF_ALPHA_VAL] = 0x10, - [PLL_OFF_ALPHA_VAL_U] = 0x14, - [PLL_OFF_USER_CTL] = 0x18, - [PLL_OFF_USER_CTL_U] = 0x1c, - [PLL_OFF_CONFIG_CTL] = 0x20, - [PLL_OFF_STATUS] = 0x28, - [PLL_OFF_TEST_CTL] = 0x30, - [PLL_OFF_TEST_CTL_U] = 0x34, - }, }; static struct clk_alpha_pll ipq_pll_huayra = { @@ -57,12 +46,7 @@ static struct clk_alpha_pll ipq_pll_huayra = { static struct clk_alpha_pll ipq_pll_stromer = { .offset = 0x0, - /* - * Reuse CLK_ALPHA_PLL_TYPE_STROMER_PLUS register offsets. - * Although this is a bit confusing, but the offset values - * are correct nevertheless. - */ - .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS], + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER], .flags = SUPPORTS_DYNAMIC_UPDATE, .clkr = { .enable_reg = 0x0, @@ -80,7 +64,11 @@ static struct clk_alpha_pll ipq_pll_stromer = { static struct clk_alpha_pll ipq_pll_stromer_plus = { .offset = 0x0, - .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS], + /* + * The register offsets of the Stromer Plus PLL used in IPQ5332 + * are the same as the Stromer PLL's offsets. + */ + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER], .flags = SUPPORTS_DYNAMIC_UPDATE, .clkr = { .enable_reg = 0x0, -- 2.44.0
