RB5gen2 is Thundercomm's development platform used for IOT solutions. It is based on Rb5gen2-SOM which is using QCOM's QCS8550 SoC. On-board components: - Qualcomm QCS8550 SoC - LPDDR5, 12 GiB - UFS3.1, 128 GiB - USB3.1 On-board PMICs: - PM8550VS - PM8550VE - PM8550 - PM8550BH - PMK8550 - PMR735D - PM8010 v2 -> v3: - Move qcs8550-rb5gen2 info after sm8550 boards in qcom.yaml - Link to v2 [3]. v1 -> v2: - Update board name from qcs8550-rb5gen2-hdk to qcs8550-rb5gen2. - Update SOM name to qcs8550-rb5gen2-som. - Remove qcm8550 from board definition. - Update DT files wrt board/som name changes. - Link to v1 [2]. This series depends on [1]. [1]: https://lore.kernel.org/all/20240308070432.28195-1-quic_tengfan@xxxxxxxxxxx/ [2]: https://lore.kernel.org/all/20240202133638.4720-1-quic_wasimn@xxxxxxxxxxx/ [3]: https://lore.kernel.org/all/20240304055333.15952-1-quic_wasimn@xxxxxxxxxxx/ Wasim Nazir (3): dt-bindings: arm: qcom: Document rb5gen2 board arm64: dts: qcom: Add initial support for rb5gen2 SOM arm64: dts: qcom: Add initial support for rb5gen2 board .../devicetree/bindings/arm/qcom.yaml | 7 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/qcs8550-rb5gen2-som.dtsi | 438 ++++++++++++++++++ arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts | 136 ++++++ 4 files changed, 582 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-som.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dts -- 2.43.2
