Re: [PATCH v4 2/4] of: reserved_mem: Add code to dynamically allocate reserved_mem array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/11/2024 9:55 AM, Rob Herring wrote:
> On Fri, Mar 08, 2024 at 11:12:02AM -0800, Oreoluwa Babatunde wrote:
>> The reserved_mem array is statically allocated with a size of
>> MAX_RESERVED_REGIONS(64). Therefore, if the number of reserved_mem
>> regions exceeds this size, there will not be enough space to store
>> all the data.
>>
>> Hence, extend the use of the static array by introducing a
>> dynamically allocated array based on the number of reserved memory
>> regions specified in the DT.
>>
>> On architectures such as arm64, memblock allocated memory is not
>> writable until after the page tables have been setup. Hence, the
>> dynamic allocation of the reserved_mem array will need to be done only
>> after the page tables have been setup.
>>
>> As a result, a temporary static array is still needed in the initial
>> stages to store the information of the dynamically-placed reserved memory
>> regions because the start address is selected only at run-time and is not
>> stored anywhere else.
>> It is not possible to wait until the reserved_mem array is allocated
>> because this is done after the page tables are setup and the reserved
>> memory regions need to be initialized before then.
>>
>> After the reserved_mem array is allocated, all entries from the static
>> array is copied over to the new array, and the rest of the information
>> for the statically-placed reserved memory regions are read in from the
>> DT and stored in the new array as well.
>>
>> Once the init process is completed, the temporary static array is
>> released back to the system because it is no longer needed. This is
>> achieved by marking it as __initdata.
>>
>> Signed-off-by: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
>> ---
>>  drivers/of/fdt.c             | 15 +++++++---
>>  drivers/of/of_private.h      |  1 +
>>  drivers/of/of_reserved_mem.c | 53 ++++++++++++++++++++++++++++++++++--
>>  3 files changed, 62 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
>> index fe6c75c5a8c0..2468360d6053 100644
>> --- a/drivers/of/fdt.c
>> +++ b/drivers/of/fdt.c
>> @@ -614,13 +614,15 @@ void __init fdt_scan_reserved_mem_reg_nodes(void)
>>  	}
>>  }
>>  
>> +int total_reserved_mem_cnt = MAX_RESERVED_REGIONS;
>> +
> Put this in of_reserved_mem.c.
>
>>  /*
>>   * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory
>>   */
>>  static int __init fdt_scan_reserved_mem(void)
>>  {
>>  	int node, child;
>> -	int dynamic_nodes_cnt = 0;
>> +	int dynamic_nodes_cnt = 0, count = 0;
>>  	int dynamic_nodes[MAX_RESERVED_REGIONS];
>>  	const void *fdt = initial_boot_params;
>>  
>> @@ -643,6 +645,8 @@ static int __init fdt_scan_reserved_mem(void)
>>  		uname = fdt_get_name(fdt, child, NULL);
>>  
>>  		err = __reserved_mem_reserve_reg(child, uname);
>> +		if (!err)
>> +			count++;
>>  
>>  		/*
>>  		 * Delay allocation of the dynamically-placed regions
>> @@ -657,12 +661,16 @@ static int __init fdt_scan_reserved_mem(void)
>>  
>>  	for (int i = 0; i < dynamic_nodes_cnt; i++) {
>>  		const char *uname;
>> +		int err;
>>  
>>  		child = dynamic_nodes[i];
>>  		uname = fdt_get_name(fdt, child, NULL);
>>  
>> -		__reserved_mem_alloc_size(child, uname);
>> +		err = __reserved_mem_alloc_size(child, uname);
>> +		if (!err)
>> +			count++;
>>  	}
>> +	total_reserved_mem_cnt = count;
>>  	return 0;
>>  }
>>  
>> @@ -715,8 +723,6 @@ void __init early_init_fdt_scan_reserved_mem(void)
>>  			break;
>>  		memblock_reserve(base, size);
>>  	}
>> -
>> -	fdt_init_reserved_mem();
>>  }
>>  
>>  /**
>> @@ -1405,6 +1411,7 @@ void __init unflatten_device_tree(void)
>>  	of_alias_scan(early_init_dt_alloc_memory_arch);
>>  
>>  	unittest_unflatten_overlay_base();
>> +	fdt_init_reserved_mem();
> This change belongs in patch 1.
>
>>  }
>>  
>>  /**
>> diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
>> index 542e37a37a24..447b63413b39 100644
>> --- a/drivers/of/of_private.h
>> +++ b/drivers/of/of_private.h
>> @@ -42,6 +42,7 @@ extern struct mutex of_mutex;
>>  extern raw_spinlock_t devtree_lock;
>>  extern struct list_head aliases_lookup;
>>  extern struct kset *of_kset;
>> +extern int total_reserved_mem_cnt;
>>  
>>  #if defined(CONFIG_OF_DYNAMIC)
>>  extern int of_property_notify(int action, struct device_node *np,
>> diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
>> index d62f1956024c..3c4373b021be 100644
>> --- a/drivers/of/of_reserved_mem.c
>> +++ b/drivers/of/of_reserved_mem.c
>> @@ -26,7 +26,8 @@
>>  
>>  #include "of_private.h"
>>  
>> -static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
>> +static struct reserved_mem reserved_mem_array[MAX_RESERVED_REGIONS] __initdata;
>> +static struct reserved_mem *reserved_mem __refdata = reserved_mem_array;
>>  static int reserved_mem_count;
>>  
>>  static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
>> @@ -54,6 +55,48 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
>>  	return err;
>>  }
>>  
>> +/**
>> + * alloc_reserved_mem_array() - allocate memory for the reserved_mem
>> + * array using memblock
>> + *
>> + * This function is used to allocate memory for the reserved_mem array
>> + * according to the total number of reserved memory regions defined in
>> + * the DT.
>> + * After the new array is allocated, the information stored in the
>> + * initial static array is copied over to this new array and the
>> + * new array is used from this point on.
>> + */
>> +static int __init alloc_reserved_mem_array(void)
>> +{
>> +	struct reserved_mem *new_array;
>> +	size_t alloc_size, copy_size, memset_size;
>> +
>> +	alloc_size = array_size(total_reserved_mem_cnt, sizeof(*new_array));
>> +	if (alloc_size == SIZE_MAX)
>> +		return -1;
> Use EOVERFLOW
>
>> +
>> +	new_array = memblock_alloc(alloc_size, SMP_CACHE_BYTES);
>> +	if (!new_array)
>> +		return -ENOMEM;
>> +
>> +	copy_size = array_size(reserved_mem_count, sizeof(*new_array));
>> +	if (copy_size == SIZE_MAX)
>> +		goto overlow_err;
> This is the only path for goto, so move the cleanup here.
>
>> +
>> +	memset_size = alloc_size - copy_size;
>> +
>> +	memcpy(new_array, reserved_mem, copy_size);
>> +	memset(new_array + reserved_mem_count, 0, memset_size);
>> +
>> +	reserved_mem = new_array;
>> +	return 0;
>> +
>> +overlow_err:
>> +	memblock_free(new_array, alloc_size);
>> +	total_reserved_mem_cnt = MAX_RESERVED_REGIONS;
>> +	return -1;
> Use EOVERFLOW
>
>> +}
>> +
>>  /*
>>   * fdt_reserved_mem_save_node() - save fdt node for second pass initialization
>>   */
>> @@ -62,7 +105,7 @@ void __init fdt_reserved_mem_save_node(unsigned long node, const char *uname,
>>  {
>>  	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
>>  
>> -	if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) {
>> +	if (reserved_mem_count == total_reserved_mem_cnt) {
>>  		pr_err("not enough space for all defined regions.\n");
>>  		return;
>>  	}
>> @@ -303,7 +346,11 @@ static void __init __rmem_check_for_overlap(void)
>>   */
>>  void __init fdt_init_reserved_mem(void)
>>  {
>> -	int i;
>> +	int i, ret;
>> +
>> +	ret = alloc_reserved_mem_array();
>> +	if (ret)
>> +		pr_err("Failed to allocate memory for reserved_mem array with err: %d", ret);
> As printing a message is the only error handling, better to just print 
> something in alloc_reserved_mem_array() and return void.
>
>>  
>>  	fdt_scan_reserved_mem_reg_nodes();
>>  
>> -- 
>> 2.34.1
Hi Rob,

Thank you for the feedback. I'll implement all of this in the next
revision.

Regards,
Oreoluwa




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux