Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 08, 2024 at 11:06:24AM +0530, Manivannan Sadhasivam wrote:
> On Thu, Mar 07, 2024 at 09:36:56PM +0100, Niklas Cassel wrote:
> > On Mon, Mar 04, 2024 at 02:52:18PM +0530, Manivannan Sadhasivam wrote:
> > > Currently, dw_pcie_ep_init_registers() API is directly called by the glue
> > > drivers requiring active refclk from host. But for the other drivers, it is
> > > getting called implicitly by dw_pcie_ep_init(). This is due to the fact
> > > that this API initializes DWC EP specific registers and that requires an
> > > active refclk (either from host or generated locally by endpoint itsef).
> > > 
> > > But, this causes a discrepancy among the glue drivers. So to avoid this
> > > confusion, let's call this API directly from all glue drivers irrespective
> > > of refclk dependency. Only difference here is that the drivers requiring
> > > refclk from host will call this API only after the refclk is received and
> > > other drivers without refclk dependency will call this API right after
> > > dw_pcie_ep_init().
> > > 
> > > With this change, the check for 'core_init_notifier' flag can now be
> > > dropped from dw_pcie_ep_init() API. This will also allow us to remove the
> > > 'core_init_notifier' flag completely in the later commits.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/pci-dra7xx.c           |  7 +++++++
> > >  drivers/pci/controller/dwc/pci-imx6.c             |  8 ++++++++
> > >  drivers/pci/controller/dwc/pci-keystone.c         |  9 +++++++++
> > >  drivers/pci/controller/dwc/pci-layerscape-ep.c    |  7 +++++++
> > >  drivers/pci/controller/dwc/pcie-artpec6.c         | 13 ++++++++++++-
> > >  drivers/pci/controller/dwc/pcie-designware-ep.c   | 22 ----------------------
> > >  drivers/pci/controller/dwc/pcie-designware-plat.c |  9 +++++++++
> > >  drivers/pci/controller/dwc/pcie-keembay.c         | 16 +++++++++++++++-
> > >  drivers/pci/controller/dwc/pcie-rcar-gen4.c       | 12 +++++++++++-
> > >  drivers/pci/controller/dwc/pcie-uniphier-ep.c     | 13 ++++++++++++-
> > >  10 files changed, 90 insertions(+), 26 deletions(-)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
> > > index 0e406677060d..395042b29ffc 100644
> > > --- a/drivers/pci/controller/dwc/pci-dra7xx.c
> > > +++ b/drivers/pci/controller/dwc/pci-dra7xx.c
> > > @@ -467,6 +467,13 @@ static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
> > >  		return ret;
> > >  	}
> > >  
> > > +	ret = dw_pcie_ep_init_registers(ep);
> > > +	if (ret) {
> > 
> > Here you are using if (ret) to error check the return from
> > dw_pcie_ep_init_registers().
> > 
> > 
> > > index c0c62533a3f1..8392894ed286 100644
> > > --- a/drivers/pci/controller/dwc/pci-keystone.c
> > > +++ b/drivers/pci/controller/dwc/pci-keystone.c
> > > @@ -1286,6 +1286,13 @@ static int ks_pcie_probe(struct platform_device *pdev)
> > >  		ret = dw_pcie_ep_init(&pci->ep);
> > >  		if (ret < 0)
> > >  			goto err_get_sync;
> > > +
> > > +		ret = dw_pcie_ep_init_registers(&pci->ep);
> > > +		if (ret < 0) {
> > 
> > Here you are using if (ret < 0) to error check the return from
> > dw_pcie_ep_init_registers(). Please be consistent.
> > 
> 
> I maintained the consistency w.r.t individual drivers. Please check them
> individually.
> 
> If I maintain consistency w.r.t this patch, then the style will change within
> the drivers.

Personally, I disagree with that.

All glue drivers should use the same way of checking dw_pcie_ep_init(),
depending on the kdoc of dw_pcie_ep_init().

If the kdoc for dw_pcie_ep_init() says returns 0 on success,
then I think that it is strictly more correct to do:

ret = dw_pcie_ep_init()
if (ret) {
	<error handling>
}

And if a glue driver doesn't look like that, then I think we should change
them. (Same reasoning for dw_pcie_ep_init_registers().)


If you read code that looks like:
ret = dw_pcie_ep_init()
if (ret < 0) {
	<error handling>
}

then you assume that is is a function with a kdoc that says it can return 0
or a positive value on success, e.g. a function that returns an index in an
array.


Kind regards,
Niklas




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux