Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/4/24 08:09, Hui Liu via B4 Relay wrote:
From: Hui Liu <quic_huliu@xxxxxxxxxxx>

The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.

Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.

Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
---

[...]


+&pmk8350_pon {
+	status = "okay";
+};

This device is already enabled

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux