Re: [PATCH v1] slimbus: qcom-ngd-ctrl: Reduce auto suspend delay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/4/24 14:50, Viken Dadhaniya wrote:
Currently we have auto suspend delay of 1s which is
very high and it takes long time to driver for runtime
suspend after use case is done.

Hence to optimize runtime PM ops, reduce auto suspend
delay to 100ms.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---

What determines 1s to be high and 100ms to be low enough? Could
you share some more reasoning?

  drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index efeba8275a66..5de45a0e3da5 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -81,7 +81,7 @@
  #define SLIM_USR_MC_DISCONNECT_PORT	0x2E
  #define SLIM_USR_MC_REPEAT_CHANGE_VALUE	0x0
-#define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC
+#define QCOM_SLIM_NGD_AUTOSUSPEND	(MSEC_PER_SEC / 10)

This could be a good opportunity to inline this value..

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux