Re: [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver

[Caleb Connolly <caleb.connolly@xxxxxxxxxx>]

On 09/02/2024 00:16, Richard Acayan wrote:
> The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL)
> variant. Add the driver for it, generated by
> linux-mdss-dsi-panel-driver-generator.
> 
> There are other panels connected to the same S6E3FA7 display controller,
> such as the AMS604NL01 panel, which are incompatible with this driver.
> Name the device tree compatible after the panel model according to
> iFixit.
> 
> Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
> Link: https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi
> Link: https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
> Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhK
> Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c | 285 ++++++++++++++++++
>  3 files changed, 295 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
> 

> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
> new file mode 100644
> index 000000000000..10bc8fb5f1f9
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
> @@ -0,0 +1,285 @@

[snip]
> +
> +static int s6e3fa7_panel_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct s6e3fa7_panel *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ctx->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> +				     "Failed to get reset-gpios\n");
> +
> +	ctx->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
This flag is only used for video mode panels, you can drop it.

With that,

Reviewed-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> +			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
> +
> +	drm_panel_init(&ctx->panel, dev, &s6e3fa7_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +	ctx->panel.prepare_prev_first = true;
> +
> +	ctx->panel.backlight = s6e3fa7_panel_create_backlight(dsi);
> +	if (IS_ERR(ctx->panel.backlight))
> +		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> +				     "Failed to create backlight\n");
> +
> +	drm_panel_add(&ctx->panel);
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> +		drm_panel_remove(&ctx->panel);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void s6e3fa7_panel_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct s6e3fa7_panel *ctx = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	ret = mipi_dsi_detach(dsi);
> +	if (ret < 0)
> +		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> +	drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id s6e3fa7_panel_of_match[] = {
> +	{ .compatible = "samsung,s6e3fa7-ams559nk06" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, s6e3fa7_panel_of_match);
> +
> +static struct mipi_dsi_driver s6e3fa7_panel_driver = {
> +	.probe = s6e3fa7_panel_probe,
> +	.remove = s6e3fa7_panel_remove,
> +	.driver = {
> +		.name = "panel-samsung-s6e3fa7",
> +		.of_match_table = s6e3fa7_panel_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(s6e3fa7_panel_driver);
> +
> +MODULE_AUTHOR("Richard Acayan <mailingradian@xxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM driver for Samsung S6E3FA7 command mode DSI panel");
> +MODULE_LICENSE("GPL");

-- 
// Caleb (they/them)