Re: [PATCH v4 1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 01, 2024 at 06:59:01PM +0200, Abel Vesa wrote:
> Add dedicated schema for the PCIe controllers found on X1E80100.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

- Mani

> ---
>  .../bindings/pci/qcom,pcie-x1e80100.yaml           | 165 +++++++++++++++++++++
>  1 file changed, 165 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> new file mode 100644
> index 000000000000..1074310a8e7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm X1E80100 PCI Express Root Complex
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@xxxxxxxxxx>
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> +
> +description:
> +  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
> +  the Synopsys DesignWare PCIe IP.
> +
> +properties:
> +  compatible:
> +    const: qcom,pcie-x1e80100
> +
> +  reg:
> +    minItems: 5
> +    maxItems: 6
> +
> +  reg-names:
> +    minItems: 5
> +    items:
> +      - const: parf # Qualcomm specific registers
> +      - const: dbi # DesignWare PCIe registers
> +      - const: elbi # External local bus interface registers
> +      - const: atu # ATU address space
> +      - const: config # PCIe configuration space
> +      - const: mhi # MHI registers
> +
> +  clocks:
> +    minItems: 7
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: aux # Auxiliary clock
> +      - const: cfg # Configuration clock
> +      - const: bus_master # Master AXI clock
> +      - const: bus_slave # Slave AXI clock
> +      - const: slave_q2a # Slave Q2A clock
> +      - const: noc_aggr # Aggre NoC PCIe AXI clock
> +      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
> +
> +  interrupts:
> +    minItems: 8
> +    maxItems: 8
> +
> +  interrupt-names:
> +    items:
> +      - const: msi0
> +      - const: msi1
> +      - const: msi2
> +      - const: msi3
> +      - const: msi4
> +      - const: msi5
> +      - const: msi6
> +      - const: msi7
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 2
> +
> +  reset-names:
> +    minItems: 1
> +    items:
> +      - const: pci # PCIe core reset
> +      - const: link_down # PCIe link down reset
> +
> +allOf:
> +  - $ref: qcom,pcie-common.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie@1c08000 {
> +            compatible = "qcom,pcie-x1e80100";
> +            reg = <0 0x01c08000 0 0x3000>,
> +                  <0 0x7c000000 0 0xf1d>,
> +                  <0 0x7c000f40 0 0xa8>,
> +                  <0 0x7c001000 0 0x1000>,
> +                  <0 0x7c100000 0 0x100000>,
> +                  <0 0x01c0b000 0 0x1000>;
> +            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
> +            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
> +                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
> +
> +            bus-range = <0x00 0xff>;
> +            device_type = "pci";
> +            linux,pci-domain = <0>;
> +            num-lanes = <2>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +
> +            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
> +                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
> +                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
> +                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
> +                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
> +                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
> +                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
> +            clock-names = "aux",
> +                          "cfg",
> +                          "bus_master",
> +                          "bus_slave",
> +                          "slave_q2a",
> +                          "noc_aggr",
> +                          "cnoc_sf_axi";
> +
> +            dma-coherent;
> +
> +            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "msi0", "msi1", "msi2", "msi3",
> +                              "msi4", "msi5", "msi6", "msi7";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0x7>;
> +            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> +            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
> +                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
> +            interconnect-names = "pcie-mem", "cpu-pcie";
> +
> +            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
> +                        <0x100 &apps_smmu 0x1401 0x1>;
> +
> +            phys = <&pcie4_phy>;
> +            phy-names = "pciephy";
> +
> +            pinctrl-0 = <&pcie0_default_state>;
> +            pinctrl-names = "default";
> +
> +            power-domains = <&gcc GCC_PCIE_4_GDSC>;
> +
> +            resets = <&gcc GCC_PCIE_4_BCR>;
> +            reset-names = "pci";
> +
> +            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
> +            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux