Booting the kernel on X1E results in a message like:
[ 2.561524] qnoc-x1e80100 interconnect-0: ACV_PERF could not find RPMh address
And indeed, taking a look at cmd-db, no such BCM exists. Remove it.
Fixes: 9f196772841e ("interconnect: qcom: Add X1E80100 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/interconnect/qcom/x1e80100.c | 26 --------------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/interconnect/qcom/x1e80100.c b/drivers/interconnect/qcom/x1e80100.c
index 99824675ee3f..654abb9ce08e 100644
--- a/drivers/interconnect/qcom/x1e80100.c
+++ b/drivers/interconnect/qcom/x1e80100.c
@@ -116,15 +116,6 @@ static struct qcom_icc_node xm_sdc2 = {
.links = { X1E80100_SLAVE_A2NOC_SNOC },
};
-static struct qcom_icc_node ddr_perf_mode_master = {
- .name = "ddr_perf_mode_master",
- .id = X1E80100_MASTER_DDR_PERF_MODE,
- .channels = 1,
- .buswidth = 4,
- .num_links = 1,
- .links = { X1E80100_SLAVE_DDR_PERF_MODE },
-};
-
static struct qcom_icc_node qup0_core_master = {
.name = "qup0_core_master",
.id = X1E80100_MASTER_QUP_CORE_0,
@@ -688,14 +679,6 @@ static struct qcom_icc_node qns_a2noc_snoc = {
.links = { X1E80100_MASTER_A2NOC_SNOC },
};
-static struct qcom_icc_node ddr_perf_mode_slave = {
- .name = "ddr_perf_mode_slave",
- .id = X1E80100_SLAVE_DDR_PERF_MODE,
- .channels = 1,
- .buswidth = 4,
- .num_links = 0,
-};
-
static struct qcom_icc_node qup0_core_slave = {
.name = "qup0_core_slave",
.id = X1E80100_SLAVE_QUP_CORE_0,
@@ -1377,12 +1360,6 @@ static struct qcom_icc_bcm bcm_acv = {
.nodes = { &ebi },
};
-static struct qcom_icc_bcm bcm_acv_perf = {
- .name = "ACV_PERF",
- .num_nodes = 1,
- .nodes = { &ddr_perf_mode_slave },
-};
-
static struct qcom_icc_bcm bcm_ce0 = {
.name = "CE0",
.num_nodes = 1,
@@ -1583,18 +1560,15 @@ static const struct qcom_icc_desc x1e80100_aggre2_noc = {
};
static struct qcom_icc_bcm * const clk_virt_bcms[] = {
- &bcm_acv_perf,
&bcm_qup0,
&bcm_qup1,
&bcm_qup2,
};
static struct qcom_icc_node * const clk_virt_nodes[] = {
- [MASTER_DDR_PERF_MODE] = &ddr_perf_mode_master,
[MASTER_QUP_CORE_0] = &qup0_core_master,
[MASTER_QUP_CORE_1] = &qup1_core_master,
[MASTER_QUP_CORE_2] = &qup2_core_master,
- [SLAVE_DDR_PERF_MODE] = &ddr_perf_mode_slave,
[SLAVE_QUP_CORE_0] = &qup0_core_slave,
[SLAVE_QUP_CORE_1] = &qup1_core_slave,
[SLAVE_QUP_CORE_2] = &qup2_core_slave,
---
base-commit: 1870cdc0e8dee32e3c221704a2977898ba4c10e8
change-id: 20240302-topic-faux_bcm_x1e-8639adf9d010
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
