Hello:
This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@xxxxxxxxxxxxx>:
On Wed, 28 Feb 2024 18:24:08 +0100 you wrote:
> QCA808x does not currently fill in the possible_interfaces.
>
> This leads to Phylink not being aware that it supports 2500Base-X as well
> so in cases where it is connected to a DSA switch like MV88E6393 it will
> limit that port to phy-mode set in the DTS.
>
> That means that if SGMII is used you are limited to 1G only while if
> 2500Base-X was set you are limited to 2.5G only.
>
> [...]
Here is the summary with links:
- [net-next,v2,1/2] net: phy: qcom: qca808x: add helper for checking for 1G only model
https://git.kernel.org/netdev/net-next/c/f058b2dd70b1
- [net-next,v2,2/2] net: phy: qcom: qca808x: fill in possible_interfaces
https://git.kernel.org/netdev/net-next/c/cb28f7029606
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
