Hi, Bjorn
> I still don't see a patch that does "something-supply = <&ipq6018_l2>;",
> which would imply that the main thing this patch achieves is that the
> regulator framework might turn the regulator off after a while.
> Shouldn't there be a user of ipq6018_l2?
Although there is the sdhc node in ipq6018-cp01-c1 in the qsdk kernel,
I don't have the official rdp board of qca, so I can't test it.
Normally it looks like this:
&sdhc {
bus-width = <4>;
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
... /* specific properties */
pinctrl-0 = <&sdhci_pins>;
pinctrl-names = "default";
vqmmc-supply = <&ipq6018_l2>;
status = "okay";
};
As for actual routers, there are users.
One of the examples is on openwrt, a development board like 8devices:
https://github.com/openwrt/openwrt/blob/main/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts#L272
vqmmc-supply = <&ipq6018_l2>;
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
...
The function of this node is to reference sd/emmc supply for devices
with pmic. Please let me know if it doesn't fit in this patch series
and I will deal with this in another pmic patch series.
Thanks,
Chukun
--
2.25.1
