The X1E80100 platform comes with a v7 SPMI arbiter, which means it implements two separate buses. The boards using this platform come with 3 instances of SMB2360 PMIC which implement a eUSB2 repeater. This patchset relies on the support added by this patchset: https://lore.kernel.org/all/20240221-spmi-multi-master-support-v5-0-3255ca413a0b@xxxxxxxxxx/ To: Andy Gross <agross@xxxxxxxxxx> To: Bjorn Andersson <andersson@xxxxxxxxxx> To: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> To: Rob Herring <robh+dt@xxxxxxxxxx> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Rob Herring <robh@xxxxxxxxxx> Cc: linux-arm-msm@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> Changes in v2: - Reworked the whole SPMI DT node layout - Added the SPMI DT node - Added patches for each board (QCP and CRD) that adds the repeater nodes - Link to v1: https://lore.kernel.org/r/20231212-x1e80100-dts-smb2360-v1-1-c28bb4d7105e@xxxxxxxxxx --- Abel Vesa (4): arm64: dts: qcom: x1e80100: Add SPMI support arm64: dts: qcom: Add SMB2360 pmic dtsi arm64: dts: qcom: x1e80100-crd: Add repeater nodes arm64: dts: qcom: x1e80100-qcp: Add repeater nodes arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 22 +++++++++++++ arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 22 +++++++++++++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 42 +++++++++++++++++++++++++ 4 files changed, 137 insertions(+) --- base-commit: 4893c639cc3659cefaa675bf1e59f4e7571afb5c change-id: 20231201-x1e80100-dts-smb2360-0c7c25f2e0a7 Best regards, -- Abel Vesa <abel.vesa@xxxxxxxxxx>
