[PATCH 2/3] net: qrtr: support suspend/hibernation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


MHI devices may not be destroyed during suspend/hibernation, so need
to unprepare/prepare MHI channels throughout the transition.

The RFC version adds new API to MHI stack with which an MHI controller
driver can do unprepare/prepare directly by itself, see


Although it works well Mani pointed out that the design is not good
because MHI channels are managed by MHI client driver thus should not
be touched by others. See the discussion


This version changes to add suspend/resume callbacks to achieve the
same purpose. The suspend callback is called in the late suspend stage,
this means MHI channels are still alive at suspend stage, and that makes
it possible for an MHI controller driver to communicate with others over
those channels at suspend stage. While the resume callback is called in
the early resume stage, for a similar reason.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
 net/qrtr/mhi.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
index 9ced13c0627a..b54a6c2113e9 100644
--- a/net/qrtr/mhi.c
+++ b/net/qrtr/mhi.c
@@ -118,6 +118,32 @@ static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
 MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
+static int qcom_mhi_qrtr_pm_suspend_late(struct device *dev)
+	struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
+	mhi_unprepare_from_transfer(mhi_dev);
+	return 0;
+static int qcom_mhi_qrtr_pm_resume_early(struct device *dev)
+	struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
+	int rc;
+	rc = mhi_prepare_for_transfer_autoqueue(mhi_dev);
+	if (rc)
+		dev_err(dev, "failed to prepare for autoqueue transfer %d\n", rc);
+	return rc;
+static const struct dev_pm_ops __maybe_unused qcom_mhi_qrtr_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(qcom_mhi_qrtr_pm_suspend_late,
+				     qcom_mhi_qrtr_pm_resume_early)
 static struct mhi_driver qcom_mhi_qrtr_driver = {
 	.probe = qcom_mhi_qrtr_probe,
 	.remove = qcom_mhi_qrtr_remove,
@@ -126,6 +152,9 @@ static struct mhi_driver qcom_mhi_qrtr_driver = {
 	.id_table = qcom_mhi_qrtr_id_table,
 	.driver = {
 		.name = "qcom_mhi_qrtr",
+#ifdef CONFIG_PM
+		.pm = &qcom_mhi_qrtr_pm_ops,

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux