Re: [PATCH 2/5] drivers: mtd: nand: Add qpic_common API file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/15/2024 8:30 PM, Dmitry Baryshkov wrote:
On Thu, 15 Feb 2024 at 15:53, Md Sadre Alam <quic_mdalam@xxxxxxxxxxx> wrote:

Add qpic_common.c file which hold all the common
qpic APIs which will be used by both qpic raw nand
driver and qpic spi nand driver.

Co-developed-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
---
  drivers/mtd/nand/Makefile            |    1 +
  drivers/mtd/nand/qpic_common.c       |  786 +++++++++++++++++
  drivers/mtd/nand/raw/qcom_nandc.c    | 1226 +-------------------------
  include/linux/mtd/nand-qpic-common.h |  488 ++++++++++
  4 files changed, 1291 insertions(+), 1210 deletions(-)
  create mode 100644 drivers/mtd/nand/qpic_common.c
  create mode 100644 include/linux/mtd/nand-qpic-common.h

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 19e1291ac4d5..131707a41293 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -12,3 +12,4 @@ nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
  nandcore-$(CONFIG_MTD_NAND_ECC_SW_HAMMING) += ecc-sw-hamming.o
  nandcore-$(CONFIG_MTD_NAND_ECC_SW_BCH) += ecc-sw-bch.o
  nandcore-$(CONFIG_MTD_NAND_ECC_MXIC) += ecc-mxic.o
+obj-y += qpic_common.o
diff --git a/drivers/mtd/nand/qpic_common.c b/drivers/mtd/nand/qpic_common.c
new file mode 100644
index 000000000000..4d74ba888028
--- /dev/null
+++ b/drivers/mtd/nand/qpic_common.c
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * QPIC Controller common API file.
+ * Copyright (C) 2023  Qualcomm Inc.
+ * Authors:    Md sadre Alam           <quic_mdalam@xxxxxxxxxxx>
+ *             Sricharan R             <quic_srichara@xxxxxxxxxxx>
+ *             Varadarajan Narayanan   <quic_varada@xxxxxxxxxxx>

This is a bit of an exaggeration. You are moving code, not writing new
code. Please retain the existing copyrights for the moved code.
Ok

+ *
+ */
+
+#include <linux/mtd/nand-qpic-common.h>
+
+struct qcom_nand_controller *
+get_qcom_nand_controller(struct nand_chip *chip)
+{
+       return container_of(chip->controller, struct qcom_nand_controller,
+                           controller);
+}
+EXPORT_SYMBOL(get_qcom_nand_controller);

NAK for adding functions to the global export namespace without a
proper driver-specific prefix.
Ok, will fix in next patch

Also, a bunch of the code here seems not so well thought. It was fine
for an internal interface, but it doesn't look so good as a common
wrapper. Please consider defining a sensible common code module
interface instead.

 QPIC controller will support both raw NAND as well Serial nand interface.
 This common API file was the part of raw NAND driver , since for serial
 nand most of the APIs from raw nand driver will be re-used that's why i
 have created this common API file, so that QPIC serial nand driver
 drivers/spi/spi-qpic-snand.c and QPIC raw NAND driver
 drivers/mtd/nand/raw/qcom_nandc.c can used these common APIs.

 Could you please suggest how I should handle this in batter way.

At least each function that is being exported should get a kerneldoc.
Ok

Last, but not least, please use EXPORT_SYMBOL_GPL.
Ok

+
+/*
+ * Helper to prepare DMA descriptors for configuring registers
+ * before reading a NAND page.
+ */
+void config_nand_page_read(struct nand_chip *chip)
+{
+       struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+       write_reg_dma(nandc, NAND_ADDR0, 2, 0);
+       write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
+       if (!nandc->props->qpic_v2)
+               write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
+       write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
+       write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
+                     NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+}
+EXPORT_SYMBOL(config_nand_page_read);
+
+/* Frees the BAM transaction memory */
+void free_bam_transaction(struct qcom_nand_controller *nandc)
+{
+       struct bam_transaction *bam_txn = nandc->bam_txn;
+
+       devm_kfree(nandc->dev, bam_txn);

devm_kfree is usually a bad sign. Either the devm_kfree should be
dropped (because the memory area is allocated only during probe / init
and doesn't need to be freed manually) or use kalloc/kfree directly
without devres wrapping.
Ok

+}
+EXPORT_SYMBOL(free_bam_transaction);
+

[skipped the rest]

--
2.34.1




--
With best wishes
Dmitry

Thanks for reviewing, Will fix all the comments in next patch.

Regards,
Alam.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux