Re: [PATCH v5 09/18] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 20, 2024 at 12:16:10PM +0100, Bartosz Golaszewski wrote:
> On Mon, Feb 19, 2024 at 8:59 PM Mark Brown <broonie@xxxxxxxxxx> wrote:
> > On Mon, Feb 19, 2024 at 07:48:20PM +0100, Bartosz Golaszewski wrote:

> > > No, the users don't request any regulators (or rather: software
> > > representations thereof) because - as per the cover letter - no
> > > regulators are created by the PMU driver. This is what is physically
> > > on the board - as the schematics and the datasheet define it. I took

> > The above makes no sense.  How can constraints be "what is physically on
> > the board", particularly variable constrants when there isn't even a
> > consumer?  What values are you taking from which documentation?

> The operating conditions for PMU outputs. I took them from a
> confidential datasheet. There's a table for input constraints and
> possible output values.

That sounds like you're just putting the maximum range of voltages that
the PMU can output in there.  This is a fundamental misunderstanding of
what the constraints are for, the constraints exist to specify what is
safe on a specific board which will in essentially all cases be much
more restricted.  The regulator driver should describe whatever the PMU
can support by itself, the constraints whatever is actually safe and
functional on the specific board.

> And what do you mean by there not being any consumers? The WLAN and BT
> *are* the consumers.

There are no drivers that bind to the regulators and vary the voltages
at runtime.

> > > the values from the docs verbatim. In C, we create a power sequencing
> > > provider which doesn't use the regulator framework at all.

> > For something that doesn't use the regulator framework at all what
> > appears to be a provider in patch 16 ("power: pwrseq: add a driver for
> > the QCA6390 PMU module") seems to have a lot of regualtor API calls?

> This driver is a power sequencing *provider* but also a regulator
> *consumer*. It gets regulators from the host and exposes a power
> sequencer to *its* consumers (WLAN and BT). On DT it exposes
> regulators (LDO outputs of the PMU) but we don't instantiate them in
> C.

Right, which sounds a lot like being a user of the regualtor framework.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux