On 26.01.2024 09:22, Qiang Yu wrote: > WLAN is connected to PCIe0 on aim300 board. Hence, enable PCIe0 to let > WLAN work. > > Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx> > --- > This change is tested and rebased on https://lore.kernel.org/linux-arm-msm/20240119100621.11788-7-quic_tengfan@xxxxxxxxxxx/ > > arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > index 20a3c97..d42cfac 100644 > --- a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts > @@ -251,7 +251,7 @@ > > &gcc { > clocks = <&bi_tcxo_div2>, <&sleep_clk>, > - <0>, > + <&pcie0_phy>, > <&pcie1_phy>, > <0>, > <&ufs_mem_phy 0>, > @@ -349,6 +349,23 @@ > status = "okay"; > }; > > +&pcie0 { > + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie0_default_state>; property-n property-names Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad
