The document defines the binding for a component that loads firmware for
and boots the Qualcomm WCNSS core.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
Changes since v1:
- Dropped custom properties for firmware-name and crash-reason
.../bindings/remoteproc/qcom,wcnss-pil.txt | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
new file mode 100644
index 000000000000..e69bd415106b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -0,0 +1,92 @@
+Qualcomm WCNSS Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm WCNSS core.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,riva-pil",
+ "qcom,pronto-v1-pil",
+ "qcom,pronto-v2-pil"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address and size of riva/pronto PMU registers
+
+- interrupts-extended:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the watchdog, fatal, ready, handover and
+ stop-ack IRQs, in order.
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: should be "wdog", "fatal", "ready", "handover", "stop-ack"
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the xo clock and optionally the rf_clk
+
+- clock-names:
+ Usage: requireduired
+ Value type: <stringlist>
+ Definition: should be "xo", optionally followed by "rf"
+
+- qcom,iris-vddxo-supply:
+- qcom,iris-vddrfa-supply:
+- qcom,iris-vddpa-supply:
+- qcom,iris-vdddig-supply:
+- qcom,pronto-vddmx-supply:
+- qcom,pronto-vddcx-supply:
+- qcom,pronto-vddpx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the regulators to be held on behalf of the
+ booting of the WCNSS core
+
+- qcom,state:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to the SMEM state used to indicate to WCNSS that
+ it should shut down
+
+- qcom,state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: should be "stop"
+
+= EXAMPLE
+
+pronto_rproc@fb21b000 {
+ compatible = "qcom,pronto-v2-pil";
+ reg = <0xfb21b000 0x3000>;
+
+ interrupts-extended = <&intc 0 149 1>,
+ <&wcnss_smp2p_slave 0 0>,
+ <&wcnss_smp2p_slave 1 0>,
+ <&wcnss_smp2p_slave 2 0>,
+ <&wcnss_smp2p_slave 3 0>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
+ clock-names = "xo", "rf";
+
+ qcom,iris-vddxo-supply = <&pm8941_l6>;
+ qcom,iris-vddrfa-supply = <&pm8941_l11>;
+ qcom,iris-vddpa-supply = <&pm8941_l19>;
+ qcom,iris-vdddig-supply = <&pm8941_s3>;
+ qcom,pronto-vddmx-supply = <&pm8841_s1>;
+ qcom,pronto-vddcx-supply = <&pm8841_s2>;
+ qcom,pronto-vddpx-supply = <&pm8941_s3>;
+
+ qcom,state = <&wcnss_smp2p_out 0>;
+ qcom,state-names = "stop";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
