There is no guarantees that enabling ATU will hit the hardware
immediately, and subsequent accesses to configuration / IO spaces
are reliable. So fixing this by read back PCIE_ATU_CR2 register
just after writing.
Without such a fix the PCI device enumeration during kernel boot
is not reliable, and reading configuration space for particular
PCI device on the bus returns zero aka no device.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
drivers/pci/host/pcie-designware.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 02a7452bdf23..7880de63895d 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -154,6 +154,8 @@ static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
int type, u64 cpu_addr, u64 pci_addr, u32 size)
{
+ u32 val;
+
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, lower_32_bits(cpu_addr), PCIE_ATU_LOWER_BASE);
@@ -164,6 +166,11 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
dw_pcie_writel_rc(pp, upper_32_bits(pci_addr), PCIE_ATU_UPPER_TARGET);
dw_pcie_writel_rc(pp, type, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+ /*
+ * ensure that the ATU enable has been happaned before accessing
+ * pci configuration/io spaces through dw_pcie_cfg_[read|write].
+ */
+ dw_pcie_readl_rc(pp, PCIE_ATU_CR2, &val);
}
static struct irq_chip dw_msi_irq_chip = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
