From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
This adds the power sequencing driver for the QCA6390's PMU module. It
uses the pwrseq subsystem and knows how to match the sequencer to the
consumer device by verifying the relevant properties and DT layout.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
drivers/power/sequencing/Kconfig | 16 ++
drivers/power/sequencing/Makefile | 2 +
drivers/power/sequencing/pwrseq-qca6390.c | 232 ++++++++++++++++++++++
3 files changed, 250 insertions(+)
create mode 100644 drivers/power/sequencing/pwrseq-qca6390.c
diff --git a/drivers/power/sequencing/Kconfig b/drivers/power/sequencing/Kconfig
index ba5732b1dbf8..84ddf3b4ae56 100644
--- a/drivers/power/sequencing/Kconfig
+++ b/drivers/power/sequencing/Kconfig
@@ -10,3 +10,19 @@ menuconfig POWER_SEQUENCING
during power-up.
If unsure, say no.
+
+if POWER_SEQUENCING
+
+config POWER_SEQUENCING_QCA6390
+ tristate "QCA6390 PMU driver"
+ default m if ARCH_QCOM
+ help
+ Say U here to enable the power sequencing driver for Qualcomm
+ QCA6390.
+
+ The QCA6390 package contains the BT and WLAN modules whose power
+ is controlled by the PMU module. As the former two share the power-up
+ sequence which is executed by the PMU, this driver is needed for
+ correct power control.
+
+endif
diff --git a/drivers/power/sequencing/Makefile b/drivers/power/sequencing/Makefile
index dcdf8c0c159e..628345c4e7ae 100644
--- a/drivers/power/sequencing/Makefile
+++ b/drivers/power/sequencing/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_POWER_SEQUENCING) += pwrseq-core.o
pwrseq-core-y := core.o
+
+obj-$(CONFIG_POWER_SEQUENCING_QCA6390) += pwrseq-qca6390.o
diff --git a/drivers/power/sequencing/pwrseq-qca6390.c b/drivers/power/sequencing/pwrseq-qca6390.c
new file mode 100644
index 000000000000..6c930e3e88ec
--- /dev/null
+++ b/drivers/power/sequencing/pwrseq-qca6390.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pwrseq/provider.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+struct pwrseq_qca6390_vreg {
+ const char *name;
+ unsigned int load_uA;
+};
+
+struct pwrseq_qca6390_pdata {
+ const struct pwrseq_qca6390_vreg *vregs;
+ size_t num_vregs;
+ unsigned int pwup_delay_msec;
+};
+
+struct pwrseq_qca6390_ctx {
+ struct pwrseq_device *pwrseq;
+ struct device_node *of_node;
+ const struct pwrseq_qca6390_pdata *pdata;
+ struct regulator_bulk_data *regs;
+ struct gpio_desc *bt_gpio;
+ struct gpio_desc *wlan_gpio;
+};
+
+static const struct pwrseq_qca6390_vreg pwrseq_qca6390_vregs[] = {
+ {
+ .name = "vddio",
+ .load_uA = 20000,
+ },
+ {
+ .name = "vddaon",
+ .load_uA = 100000,
+ },
+ {
+ .name = "vddpmu",
+ .load_uA = 1250000,
+ },
+ {
+ .name = "vddpcie1",
+ .load_uA = 35000,
+ },
+ {
+ .name = "vddpcie2",
+ .load_uA = 15000,
+ },
+ {
+ .name = "vddrfa1",
+ .load_uA = 200000,
+ },
+ {
+ .name = "vddrfa2",
+ .load_uA = 400000,
+ },
+ {
+ .name = "vddrfa3",
+ .load_uA = 400000,
+ },
+};
+
+static const struct pwrseq_qca6390_pdata pwrseq_qca6390_of_data = {
+ .vregs = pwrseq_qca6390_vregs,
+ .num_vregs = ARRAY_SIZE(pwrseq_qca6390_vregs),
+ .pwup_delay_msec = 16,
+};
+
+static int pwrseq_qca6390_power_on(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qca6390_ctx *ctx = pwrseq_device_get_data(pwrseq);
+ int ret;
+
+ ret = regulator_bulk_enable(ctx->pdata->num_vregs, ctx->regs);
+ if (ret)
+ return ret;
+
+ gpiod_set_value_cansleep(ctx->bt_gpio, 1);
+ gpiod_set_value_cansleep(ctx->wlan_gpio, 1);
+
+ if (ctx->pdata->pwup_delay_msec)
+ msleep(ctx->pdata->pwup_delay_msec);
+
+ return 0;
+}
+
+static int pwrseq_qca6390_power_off(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qca6390_ctx *ctx = pwrseq_device_get_data(pwrseq);
+
+ gpiod_set_value_cansleep(ctx->bt_gpio, 0);
+ gpiod_set_value_cansleep(ctx->wlan_gpio, 0);
+
+ return regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+}
+
+static int pwrseq_qca6390_match(struct pwrseq_device *pwrseq,
+ struct device *dev)
+{
+ struct pwrseq_qca6390_ctx *ctx = pwrseq_device_get_data(pwrseq);
+ struct device_node *dev_node = dev->of_node;
+
+ /*
+ * The PMU supplies power to the Bluetooth and WLAN modules. both
+ * consume the PMU AON output so check the presence of the
+ * 'vddaon-supply' property and whether it leads us to the right
+ * device.
+ */
+ if (!of_property_present(dev_node, "vddaon-supply"))
+ return 0;
+
+ struct device_node *reg_node __free(of_node) =
+ of_parse_phandle(dev_node, "vddaon-supply", 0);
+ if (!reg_node)
+ return 0;
+
+ /*
+ * `reg_node` is the PMU AON regulator, its parent is the `regulators`
+ * node and finally its grandparent is the PMU device node that we're
+ * looking for.
+ */
+ if (!reg_node->parent || !reg_node->parent->parent ||
+ reg_node->parent->parent != ctx->of_node)
+ return 0;
+
+ return 1;
+}
+
+static int pwrseq_qca6390_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pwrseq_qca6390_ctx *ctx;
+ struct pwrseq_config config;
+ int ret, i;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->of_node = dev->of_node;
+
+ ctx->pdata = of_device_get_match_data(dev);
+ if (!ctx->pdata)
+ return dev_err_probe(dev, -ENODEV,
+ "Failed to obtain platform data\n");
+
+ if (ctx->pdata->vregs) {
+ ctx->regs = devm_kcalloc(dev, ctx->pdata->num_vregs,
+ sizeof(*ctx->regs), GFP_KERNEL);
+ if (!ctx->regs)
+ return -ENOMEM;
+
+ for (i = 0; i < ctx->pdata->num_vregs; i++)
+ ctx->regs[i].supply = ctx->pdata->vregs[i].name;
+
+ ret = devm_regulator_bulk_get(dev, ctx->pdata->num_vregs,
+ ctx->regs);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to get all regulators\n");
+
+ for (i = 0; i < ctx->pdata->num_vregs; i++) {
+ if (!ctx->pdata->vregs[1].load_uA)
+ continue;
+
+ ret = regulator_set_load(ctx->regs[i].consumer,
+ ctx->pdata->vregs[i].load_uA);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to set vreg load\n");
+ }
+ }
+
+ ctx->bt_gpio = devm_gpiod_get_optional(dev, "bt-enable", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->bt_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio),
+ "Failed to get the Bluetooth enable GPIO\n");
+
+ ctx->wlan_gpio = devm_gpiod_get_optional(dev, "wlan-enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->wlan_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->wlan_gpio),
+ "Failed to get the WLAN enable GPIO\n");
+
+ memset(&config, 0, sizeof(config));
+
+ config.parent = dev;
+ config.owner = THIS_MODULE;
+ config.drvdata = ctx;
+ config.match = pwrseq_qca6390_match;
+ config.power_on = pwrseq_qca6390_power_on;
+ config.power_off = pwrseq_qca6390_power_off;
+
+ ctx->pwrseq = devm_pwrseq_device_register(dev, &config);
+ if (IS_ERR(ctx->pwrseq))
+ return dev_err_probe(dev, PTR_ERR(ctx->pwrseq),
+ "Failed to register the power sequencer\n");
+
+ return 0;
+}
+
+static const struct of_device_id pwrseq_qca6390_of_match[] = {
+ {
+ .compatible = "qcom,qca6390-pmu",
+ .data = &pwrseq_qca6390_of_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pwrseq_qca6390_of_match);
+
+static struct platform_driver pwrseq_qca6390_driver = {
+ .driver = {
+ .name = "pwrseq-qca6390",
+ .of_match_table = pwrseq_qca6390_of_match,
+ },
+ .probe = pwrseq_qca6390_probe,
+};
+module_platform_driver(pwrseq_qca6390_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>");
+MODULE_DESCRIPTION("QCA6390 PMU power sequencing driver");
+MODULE_LICENSE("GPL");
--
2.40.1
