Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Dmitry
> I went on and checked ipq6018.dtsi. It will need to be reworked before
> we can continue with PMIC-less devices.

> Obviously, the PMIC is not a part of the SoC. So please move the
> "qcom,rpm-mp5496-regulators" node to the board files together with the
> cpu-supply properties that reference that regulator.

Thanks a lot for your advice, now things are clearer.
My idea is as follows:

1. Add all frequencies supported by SoCs in ipq6018.dtsi

2. Move cpu-supply and mp5496 nodes to ipq6018-mp5496.dtsi

&CPU0 {
	cpu-supply = <&ipq6018_s2>;
};
...

&rpm_requests {
	regulators {
		rpm-mp5496...
		ipq6018_s2...
	};
};

> The SoC itself supports all listed frequencies, so it is incorrect to
> split the opp tables from the ipq6018.dtsi. Instead please patch the
> PMIC-less boards in the following way:

> #include "ipq6018.dtsi"
> &cpu_opp_table {
>  /* the board doesn't have a PMIC, disable CPU frequencies which
> require higher voltages */
>  /delete-node/ opp-1320000000;
>  /delete-node/ opp-1440000000;
>};

Thank you but no need. The CPUFreq NVMEM driver will give the CPU
maximum frequency based on the cpu_speed_bin and opp-supported-hw.

Thanks,
Chukun

-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux