QMP PHY used in SM8650 requires 3 clocks:
* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from TCSR
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 942e602bfc97..464b871ebcb7 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2476,10 +2476,12 @@ ufs_mem_phy: phy@1d80000 {
compatible = "qcom,sm8650-qmp-ufs-phy";
reg = <0 0x01d80000 0 0x2000>;
- clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&tcsr TCSR_UFS_CLKREF_EN>;
clock-names = "ref",
- "ref_aux";
+ "ref_aux",
+ "qref";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
--
2.25.1
