QMP PHY used in SM6125 requires 3 clocks:
* ref - 19.2MHz reference clock from RPM
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from GCC
Fixes: f8399e8a2f80 ("arm64: dts: qcom: sm6125: Add UFS nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 00a2e0980163..98ab08356088 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -812,10 +812,12 @@ ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6125-qmp-ufs-phy";
reg = <0x04807000 0xdb8>;
- clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
- <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&gcc GCC_UFS_MEM_CLKREF_CLK>;
clock-names = "ref",
- "ref_aux";
+ "ref_aux",
+ "qref";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
--
2.25.1
