[PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
of using the default value of 390KHz from MDIO default divider.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2f275c84e566..08ddfeece043 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -264,6 +264,8 @@ mdio: mdio@90000 {
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 
+			clock-frequency = <6250000>;
+
 			status = "disabled";
 		};
 
-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux