Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30-01-24, 12:44, Manivannan Sadhasivam wrote:
> On Tue, Jan 30, 2024 at 11:41:11AM +0530, Viresh Kumar wrote:
> > I don't have any issues with a new callback for bw. But, AFAIU, the DT
> > is required to represent the hardware irrespective of what any OS
> > would do with it. So DT should ideally have these values here, right ?
> > 
> 
> Not necessarily. Because, right now the bandwidth values of the all peripherals
> are encoded within the drivers. Only OPP has the requirement to define the
> values in DT.

I have a bit different argument here. I am saying that it doesn't
matter if we have OPP framework or something else using these values.
The hardware must be represented properly by the DT, so Linux or any
other firmware/OS can program the device. So DT should have bandwidth
values anyway. And that's the way we have designed things in Linux
now.

> > Also, the driver has already moved away from using those macros now
> > and depend on the OPP core to do the right thing. It only uses the
> > macro for the cases where the DT OPP table isn't available. And as
> > said by few others as well already, the driver really should try to
> > add OPPs dynamically in that case to avoid multiple code paths and
> > stick to a single OPP based solution.
> > 
> 
> Still I prefer to use OPP for bandwidth control because both the voltage and
> bandwidth values need to be updated at the same time. My only point here is, if
> OPP exposes a callback for bw, then we can keep the DT behavior consistent.

Feels like we are going a bit backward on this. The current view, as
per me, is that driver shouldn't need to micromanage all these
configurations and the OPP core should be able to handle them. That's
why we want to handle all configurations from there.

This also means that the DT needs to contain all this information and
drivers shouldn't use special math functions to calculate these
values. Drivers need to move away from them, instead of getting more
of those.

I don't see how a callback would be helpful here, if the driver relies
on DT values only. Or am I confusing things here ??

-- 
viresh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux