This series adds: 1. Device tree register mapping for Broadcast_AND region in SM8450, SM8550, SM8650. 2. LLCC driver updates to reflect addition of Broadcast_AND regmap. To support CSR programming, a broadcast interface is used to program all channels in a single command. Until SM8450 there was only one broadcast region (Broadcast_OR) used to broadcast write and check for status bit 0. From SM8450 onwards another broadcast region (Broadcast_AND) has been added which checks for status bit 1. This series updates the device trees from SM8450 onwards to have a mapping to this Broadcast_AND region. It also updates the llcc_drv_data structure with a regmap for Broadcast_AND region and corrects the broadcast region used to check for status bit 1. Merging strategy ---------------- All patches should be merged due to LLCC DeviceTree/driver dependency. Unnathi Chalicheemala (5): dt-bindings: arm: msm: Add llcc Broadcast_AND register region arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region arm64: dts: qcom: sm8550: Add mapping to llcc Broadcast_AND region arm64: dts: qcom: sm8650: Add mapping to llcc Broadcast_AND region soc: qcom: llcc: Add regmap for Broadcast_AND region .../devicetree/bindings/cache/qcom,llcc.yaml | 27 ++++++++++++++++++- arch/arm64/boot/dts/qcom/sm8450.dtsi | 5 ++-- arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 +++-- arch/arm64/boot/dts/qcom/sm8650.dtsi | 6 +++-- drivers/soc/qcom/llcc-qcom.c | 12 ++++++++- include/linux/soc/qcom/llcc-qcom.h | 4 ++- 6 files changed, 51 insertions(+), 9 deletions(-) -- 2.25.1 Best Regards, Unnathi
