Re: [PATCH v2 2/2] arm64: dts: qcom: sc8280xp-x13s: Fix/enable touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Fri, Jan 26, 2024 at 08:41:39AM -0800, Bjorn Andersson wrote:
> The failing read-test in __i2c_hid_core_probe() determines that there's
> nothing connected at the documented address of the touchscreen.
> Introduce the 5ms after-power and 200ms after-reset delays found in the
> ACPI tables. Also wire up the reset-gpio, for good measure.

Please amend the commit message so that it reflects the discussion we
just had (e.g. wiring up the reset-gpio is not just for good measure).


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux