On 25/01/2024 23:56, Luca Weiss wrote:
From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Add the IOMMU used for the GPU on MSM8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index dcb5c98b793c..91d083871ab0 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1046,6 +1046,37 @@ mdss_dsi1_phy: phy@1a96400 {
};
};
+ gpu_iommu: iommu@1c48000 {
Nit: most of the platforms use the adreno_smmu label. But maybe the
msm-iommu vs arm-smmu makes difference here.
Nevertheless:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
+ compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
+ ranges = <0 0x01c48000 0x8000>;
+
+ clocks = <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&gcc OXILI_CX_GDSC>;
+
+ qcom,iommu-secure-id = <18>;
+
+ #address-cells = <1>;
+ #iommu-cells = <1>;
+ #size-cells = <1>;
+
+ /* gfx3d_user */
+ iommu-ctx@0 {
+ compatible = "qcom,msm-iommu-v2-ns";
+ reg = <0x0000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* gfx3d_secure */
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v2-sec";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
apps_iommu: iommu@1e20000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
ranges = <0 0x01e20000 0x20000>;
--
With best wishes
Dmitry
