Re: [PATCH 17/17] drm/msm/dp: allow YUV420 mode for DP connector when VSC SDP supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/01/2024 21:38, Paloma Arellano wrote:
All the components of YUV420 over DP are added. Therefore, let's mark the
connector property as true for DP connector when the DP type is not eDP
and when VSC SDP is supported.

Signed-off-by: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/dp/dp_display.c | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 4329435518351..97edd607400b8 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -370,11 +370,14 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
dp_link_process_request(dp->link); - if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.is_edp) {
+		if (dp_panel_vsc_sdp_supported(dp->panel))
+			dp->dp_display.connector->ycbcr_420_allowed = true;

Please consider fixing a TODO in drm_bridge_connector_init().

  		drm_dp_set_subconnector_property(dp->dp_display.connector,
  						 connector_status_connected,
  						 dp->panel->dpcd,
  						 dp->panel->downstream_ports);
+	}
edid = dp->panel->edid;

--
With best wishes
Dmitry





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux