[PATCH RFC 2/2] arm64: dts: qcom: msm8953: Add GPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>

Add the GPU node for the Adreno 506 found on this family of SoCs. The
clock speeds are a bit different per SoC variant, SDM450 maxes out at
600MHz while MSM8953 (= SDM625) goes up to 650MHz and SDM632 goes up to
725MHz.

To achieve this, create a new sdm450.dtsi to hold the 600MHz OPP and
use the new dtsi for sdm450-motorola-ali.

Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Co-developed-by: Luca Weiss <luca@xxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi            | 115 +++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts |   2 +-
 arch/arm64/boot/dts/qcom/sdm450.dtsi             |  14 +++
 arch/arm64/boot/dts/qcom/sdm632.dtsi             |   8 ++
 4 files changed, 138 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 91d083871ab0..1fe0c0c4fd15 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1046,6 +1046,94 @@ mdss_dsi1_phy: phy@1a96400 {
 			};
 		};
 
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-506.0", "qcom,adreno";
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GCC_OXILI_TIMER_CLK>,
+				 <&gcc GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&gpu_iommu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-133300000 {
+					opp-hz = /bits/ 64 <133300000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				/*
+				 * This opp is only available on msm8953 and
+				 * sdm632, the max for sdm450 is 600MHz.
+				 */
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
 		gpu_iommu: iommu@1c48000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
 			ranges = <0 0x01c48000 0x8000>;
@@ -2045,6 +2133,33 @@ map0 {
 				};
 			};
 		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
index 362be5719dd2..e27f3c5d5bba 100644
--- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -4,7 +4,7 @@
  */
 /dts-v1/;
 
-#include "msm8953.dtsi"
+#include "sdm450.dtsi"
 #include "pm8953.dtsi"
 #include "pmi8950.dtsi"
 
diff --git a/arch/arm64/boot/dts/qcom/sdm450.dtsi b/arch/arm64/boot/dts/qcom/sdm450.dtsi
new file mode 100644
index 000000000000..b222aeb459a3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2023, Luca Weiss <luca@xxxxxxxxx> */
+
+#include "msm8953.dtsi"
+
+&gpu_opp_table {
+	/delete-node/ opp-650000000;
+
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
index 645b9f6a801f..95b025ea260b 100644
--- a/arch/arm64/boot/dts/qcom/sdm632.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -79,3 +79,11 @@ &CPU7 {
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
+
+&gpu_opp_table {
+	opp-725000000 {
+		opp-hz = /bits/ 64 <725000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux