On 1/24/24 16:31, Luca Weiss wrote:
Add the definitions for the various thermal zones found on the SM6350
SoC. Hooking up GPU and CPU cooling can limit the clock speeds there to
reduce the temperature again to good levels.
Most thermal zones only have one critical temperature configured at
125°C which can be mostly considered a placeholder until those zones can
be hooked up to cooling.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
[...]
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
cpuss0-thermal and cpuss1-thermal are very likely the sensors for
cluster0/1, can you test that out, perhaps with corepinning+stress?
You can then assign multiple cpu cooling devices.
LGTM otherwise!
Konrad
